Reasons for uneven workpieces processed by high-speed circular saws

During the processing of high-speed circular saws, the saw blade runs at high speed. If it swings or deviates, it will cause the surface of the cut workpiece to be uneven, and even cause the saw blade of the high-speed circular saw to break or crack. Therefore, when using a circular saw to cut workpieces, it is necessary to strictly follow the relevant regulations to avoid many uneven cut workpieces. The following are some common reasons for uneven workpieces cut by high-speed circular saws and treatment methods:

1. The saw blade of the high-speed circular saw is not installed correctly

When the high-speed circular saw is cutting, the main part is the circular saw blade, which will affect the quality of the entire production. If it is not installed correctly, various problems will occur, such as uneven cut workpieces or burrs; in severe cases, burst teeth will occur.

Treatment method:

Stop the operation of the equipment, cut off the power supply, check whether the saw blade screws are loose, and check whether the installation direction is correct (this detail is often made by many users); then check whether the saw blade matches the circular saw equipment or materials.

2. Inaccurate parameters or positioning

Parameter error is a common problem. It can be said that most problems will arise here. There is also inaccurate shaking positioning, which is not corrected in time or there are problems with components;

Handling method:

Check the parameters and recalibrate the components. It should be noted that the power must be cut off during the inspection and maintenance process!

The circular saw machine is a high-precision metal cutting and processing machine tool equipment. In the cutting operation, there must be no negligence in any details, otherwise it will not be high-precision. Reasonable planning will help improve the quality and service life of the cutting.

3. The cut material shakes

This phenomenon is mostly caused by the fact that the clamping block in the high-speed circular saw machine is not adjusted properly, resulting in the workpiece being cut not being clamped, which causes the saw blade to offset when touching the material during the cutting of the high-speed circular saw machine; in this way, the surface of the workpiece under the sawing will definitely not be flat.

Handling method:

It is relatively simple and quick to deal with this accident. As long as the clamping block of the circular saw machine equipment is adjusted, it can be solved.